SiC Silicon Carbide Ceramic Cyclone Working principle: a cyclone is a device that USES fluid pressure to produce rotational motion. When the slurry enters the cyclone at a certain speed, it is forced to make rotary movement after encountering the wall of the cyclone. Differ as a result of centrifugal force, the solid coarse particle slurry by centrifugal force is big, can overcome the hydraulic resistance to the wall movement, and under the joint action of its own gravity, along the wall spiral downward movement, the fine and small particles and most of the water because of the centrifugal force is small, not close to the wall with slurry for rotary motion.

Under the promotion of the subsequent feeding, the slurry continues to move downward and rotary, so that the coarse particles continue to concentrate towards the periphery, while the fine particles stay in the central area, and the particle size increases from the center to the wall of the device, forming a layered arrangement. With slurry from the cyclone cylinder part of moving cone part, flow section is more and more small, in outer slurry shrinkage oppression, contains a lot of tiny particles of inner slurry had to change direction of the table, turned upward movement, formed in hydrocyclone, the overflow pipe discharge, become the overflow, the massive particles continued along the wall spiral downward movement, the formation of vortex, finally through the bottom Apex, become the grit.